Makers of MOSES - The Final Answer in Marine Simulation
Rev. 7.03 Bug Fixes
REV NO: REV 7.03.001

DATE: July 11, 2008 Discovered By: Georgina Maldonado

Description Of Problem

If one gets a category summary which contains more than one part, the centers my be reported in the wrong system.

REV NO: REV 7.03.002

DATE: July 24, 2008 Discovered By: Kelvin Frazer

Description Of Problem

If one tries to start MOSES in the directory /ultra/bin/xxxx then you will get an error.

REV NO: REV 7.03.003

DATE: July 24, 2008 Discovered By: R. Nachlinger

Description Of Problem

The file selection widget is broken in Linux.

REV NO: REV 7.03.004

DATE: August 01, 2008 Discovered By: Georgina Moldonado

Description Of Problem

Movies are broken.

REV NO: REV 7.03.005

DATE: August 25, 2008 Discovered By: Stephanie Wilson

Description Of Problem

Sometimes a tank can be flooded about the waterline when it should not be.

REV NO: REV 7.03.006

DATE: September 02, 2008 Discovered By: Georgina Maldonado

Description Of Problem

If one restarts a job and immediately does a picture, it may be wrong.

REV NO: REV 7.03.007

DATE: September 08, 2008 Discovered By: Herm Bussemaker

Description Of Problem

If one does ADD_COLUMN xxx -COLUMN, her will get a segment violation.

REV NO: REV 7.03.008

DATE: September 09, 2008 Discovered By: Greg Hook

Description Of Problem

Sometimes one may receive an incorrect error message that says a good plate has zero area.

REV NO: REV 7.03.010

DATE: September 18, 2008 Discovered By: Ray Nachlinger

Description Of Problem

Sometimes MOSES will vanish for no particular reason on LINUX.

REV NO: REV 7.03.011

DATE: September 23, 2008 Discovered By: Tecon

Description Of Problem

The &GET string function has a limit of 25 things from which to choose. This is changed to 500.

REV NO: REV 7.03.012

DATE: September 25, 2008 Discovered By: Georgina Maldonado

Description Of Problem

The -L_DELTA option of &CONNECTOR is broken.

REV NO: REV 7.03.013

DATE: September 29, 2008 Discovered By: Ray Nachlinger

Description Of Problem

You cannot do two movies back to back.

REV NO: REV 7.03.014

DATE: October 10, 2008 Discovered By: R. Nachlinger

Description Of Problem

API Joint check updated to conform to ERRATA and SUPPLEMENT 3 of RP2A-WSD 21st edition.

REV NO: REV 7.03.015

DATE: October 14, 2008 Discovered By: R.Nachlinger

Description Of Problem

If one does a FR_2TIME and then attempts to post process this process, he will not get a wave height.

REV NO: REV 7.03.016

DATE: October 23, 2008 Discovered By: Ray Nachlinger

Description Of Problem

The statistics of pressures in the FREQ_RESPONSE Menu are incorrect.

REV NO: REV 7.03.017

DATE: November 17, 2008 Discovered By: Herm Bussemaker

Description Of Problem

If one has a problem with more than one stiffness block, then he may get a segment violation. This is a bug which showed up with REV7.03.

REV NO: REV 7.03.018

DATE: December 05, 2008 Discovered By: Yvan Leipold

Description Of Problem

If one does a &DESCRIBE PART XXX -MOVE on a stinger part then he will get errors when he tries to define a pipe.

REV NO: REV 7.03.019

DATE: December 08, 2008 Discovered By: Tim Nolte

Description Of Problem

The colors for beam code checks during an animation are not correct.

REV NO: REV 7.03.020

DATE: December 15, 2008 Discovered By: Yvan Leipold

Description Of Problem

The "VLIST" of columns for the R_ENVELOPE command is incorrect.

REV NO: REV 7.03.021

DATE: December 16, 2008 Discovered By: Yvan Leipold

Description Of Problem

For some cases, the tensioner tension limits may be exceeded.

REV NO: REV 7.03.022

DATE: December 22, 2008 Discovered By: Georgina Maldonado

Description Of Problem

If one does an ADD_COLUMN, then the default legends for the added columns will not be correct.

REV NO: REV 7.03.023

DATE: December 31, 2008 Discovered By: R. Nachlinger

Description Of Problem

If one uses the string function, &PART, without a system, then he may get the result in the wrong system.

REV NO: REV 7.03.024

DATE: January 21, 2009 Discovered By: Georgina Maldonado

Description Of Problem

Using BEAM FATIGUE in STRPOST may produce an error message.

REV NO: REV 7.03.025

DATE: January 26, 2009 Discovered By: Yvan Leipold

Description Of Problem

The string function &GET(N_PICK is broken.

REV NO: REV 7.03.026

DATE: March 04, 2009 Discovered By: Yvan Leipold

Description Of Problem

The string function &REVERSE does not work properly with a token greater than 8 characters.

REV NO: REV 7.03.027

DATE: March 09, 2009 Discovered By: Georgina Maldonado

Description Of Problem

Fix 018 broke the "lift" test.

REV NO: REV 7.03.028

DATE: March 13, 2009 Discovered By: Georgina Maldonado

Description Of Problem

The &PART(MAX_CB) string function does not work properly if one has "moved" the part.

REV NO: REV 7.03.029

DATE: March 17, 2009 Discovered By: Devi Presad

Description Of Problem

If one has #WEIGHTs with category multipliers, the longitudinal strength results will be incorrect.

REV NO: REV 7.03.030

DATE: March 24, 2009 Discovered By: Lars Rune Helland

Description Of Problem

The stresses on gets which "clicking" on a plate subelement are not for the correct subelement.

REV NO: REV 7.03.031

DATE: March 25, 2009 Discovered By: Yvan Leipold

Description Of Problem

If one has davit/pipe assembly with more than two davits, MOSES may get hung in a loop.

REV NO: REV 7.03.032

DATE: May 19, 2009 Discovered By: Bishu Bandyopadhyay

Description Of Problem

The &CONNECTOR(@ -G_HEADING) is wrong.

REV NO: REV 7.03.033

DATE: May 19, 2009 Discovered By: Bishu Bandyopadhyay

Description Of Problem

The string function 

   &LOGICAL(.true. .eq. .true. .and. .true. .eq. .false)
returns the wrong value.
REV NO: REV 7.03.034

DATE: June 15, 2009 Discovered By: Muraliu Guiry

Description Of Problem

The &PIECE string function always returns the information for the current piece.

REV NO: REV 7.03.035

DATE: June 17, 2009 Discovered By: Paul Goodwin

Description Of Problem

Once on used MD_MOTION it cannot be turned off.

REV NO: REV 7.03.036

DATE: June 25, 2009 Discovered By: John Windus

Description Of Problem

The command &COMPARTMENT -DOWN_FLOOD is not working correctly.

REV NO: REV 7.03.037

DATE: June 25, 2009 Discovered By: Barry Miller

Description Of Problem

#DRAG load attributes should not depend on current.

REV NO: REV 7.03.038

DATE: July 15, 2009 Discovered By: Barry Miller

Description Of Problem

Not enough space is allocated to store the maximum allow forces during a time domain. The shows up if you have a large number of drift periods and headings.

REV NO: REV 7.03.039

DATE: August 12, 2009 Discovered By: Andy Zhu

Description Of Problem

If one has a really large model, then his structural results may be incorrect. This is not a problem with the structural solution, but is a naming issue. The names assigned to stress points were not unique.

REV NO: REV 7.03.040

DATE: August 19, 2009 Discovered By: Georgina Maldonado

Description Of Problem

The observation time and time step may not be properly set when one issues the FR_2TIME command.