Makers of MOSES - The Final Answer in Marine Simulation
Rev. 7.01 Bug Fixes
REV NO: REV 7.01.001

DATE: November 09, 2005 Discovered By: Ray Nachlinger

Description Of Problem

A definition of the coordinate system is needed for the frequency domain output.

REV NO: REV 7.01.002

DATE: November 11, 2005 Discovered By: Everyone

Description Of Problem

On some machines the device driver for apr does not get installed. This is a quick work around. Will really be fixed later.

REV NO: REV 7.01.003

DATE: November 11, 2005 Discovered By: Yvan Leipold

Description Of Problem

If one makes an icon and drags a file to it on windows, it may not work properly, depending on where the file is located.

REV NO: REV 7.01.004

DATE: November 11, 2005 Discovered By: Ray Nachlinger

Description Of Problem

Graphs to the screen do not work properly.

REV NO: REV 7.01.005

DATE: November 14, 2005 Discovered By: Yvan Leipold

Description Of Problem

The -movie option on &PICT is not correctly parsed.

REV NO: REV 7.01.006

DATE: November 14, 2005 Discovered By: Greg Hook

Description Of Problem

MOSES will not install properly in c:\Program Files

REV NO: REV 7.01.007

DATE: November 15, 2005 Discovered By: Yvan Leipold

Description Of Problem

One cannot "save" a gl picture for A4 paper.

REV NO: REV 7.01.008

DATE: November 18, 2005 Discovered By: Yvan Leipold

Description Of Problem

If one plots graphics to the screen from a comi file, has no pictures, and deletes a graph, MOSES will abort.

REV NO: REV 7.01.009

DATE: November 19, 2005 Discovered By: Yvan Leipold

Description Of Problem

I one does a graph and then issues a &PICT command without specifying a render type, then the picture will not have an animation control panel.

REV NO: REV 7.01.010

DATE: November 21, 2005 Discovered By: Peter Lai

Description Of Problem

The -movie option on &pict does not recognize the play multiple number.

REV NO: REV 7.01.011

DATE: November 23, 2005 Discovered By: Yvan Leipold

Description Of Problem

The -MOVIE option is still not parsed correctly.

REV NO: REV 7.01.012

DATE: November 23, 2005 Discovered By: Yvan Leipold

Description Of Problem

The output file is missing ^L at the beginning of each page.

REV NO: REV 7.01.013

DATE: November 23, 2005 Discovered By: Ray Nachlinger

Description Of Problem

One cannot make a UGX picture and the first figure.

REV NO: REV 7.01.014

DATE: November 29, 2005 Discovered By: Andy Zhu

Description Of Problem

If one has a part with a "large" move, then tank capacities in this part may not be computed correctly.

REV NO: REV 7.01.015

DATE: November 29, 2005 Discovered By: Yvan Leipold

Description Of Problem

For some simulation a GL rendered MOVIE with A4 paper may abort on a WINDOWS machine.

REV NO: REV 7.01.016

DATE: December 05, 2005 Discovered By: Ketil Roaldsnes

Description Of Problem

The -no_capsize yes option of tdom is not parsed properly.

REV NO: REV 7.01.017

DATE: December 14, 2005 Discovered By: Andy Zhu

Description Of Problem

You cannot save two GL pictures to a postscript file.

REV NO: REV 7.01.018

DATE: December 14, 2005 Discovered By: John Evans

Description Of Problem

Sometimes a tank cannot be flooded when a tide is present.

REV NO: REV 7.01.019

DATE: January 10, 2006 Discovered By: Georgina Maldonado

Description Of Problem

The fourth token of w_coef is not read.

REV NO: REV 7.01.020

DATE: January 11, 2006 Discovered By: Tjerand Vigesdal

Description Of Problem

The -mult_weight option on #PLATE and #AREA is not properly parsed and the weight defined with this option is not correct.

REV NO: REV 7.01.021

DATE: January 20, 2006 Discovered By: Ray Nachlinger

Description Of Problem

A HTML table does not have the style properly set.

REV NO: REV 7.01.022

DATE: January 26, 2006 Discovered By: Conrad Tao

Description Of Problem

The psi value is incorrect for API LFRD joint checks for axial loads in tension for T and X joints.

REV NO: REV 7.01.023

DATE: February 03, 2006 Discovered By: Yvan Leipold

Description Of Problem

If one does a part move the locations for hydrostatic moments and shears do not reflect the part move.

REV NO: REV 7.01.024

DATE: February 03, 2006 Discovered By: R. Nachlinger

Description Of Problem

Sometimes one get a segment violation when he tries to save a GL picture.

REV NO: REV 7.01.025

DATE: February 13, 2006 Discovered By: Emanual Payer

Description Of Problem

One gets an error using an input spectrum if it has more than 20 periods (you can really have up to 200).

REV NO: REV 7.01.026

DATE: February 24, 2006 Discovered By: Zhaohui Wang

Description Of Problem

If you have a b_cat with spring buoys that has intermediate grounding, MOSES aborts with a fatal error. This allows MOSES to continue so that the parts of the table with are correct can be used.

REV NO: REV 7.01.027

DATE: February 27, 2006 Discovered By: Andy Zhu

Description Of Problem

Slings in the STATIC_PROCESS Menu are not really treated correctly. This really shows up when drawing pictures here, but the problem has been around for a long time.

REV NO: REV 7.01.028

DATE: March 01, 2006 Discovered By: Sime Kolic

Description Of Problem

The units for flow rate in the &STATUS P_HOLE are incorrect.

REV NO: REV 7.01.029

DATE: March 09, 2006 Discovered By: Andy Zhu

Description Of Problem

&PICTURE does not restore the current state when issued during a process.

REV NO: REV 7.01.030

DATE: March 10, 2006 Discovered By: David Hanken

Description Of Problem

If one uses &FILE WRITE, he will get a blank character beginning each line.

REV NO: REV 7.01.031

DATE: March 14, 2006 Discovered By: Georgina Maldonado

Description Of Problem

The figure number is not shown on a GL picture.

REV NO: REV 7.01.032

DATE: March 16, 2006 Discovered By: Yvan Leipold

Description Of Problem

Inputing a spectrum is broken.

REV NO: REV 7.01.033

DATE: March 29, 2006 Discovered By: Marcelo Canga

Description Of Problem

If one is using a physical device of tex for the output channel and he changes the file, then latex will be unhappy that the alltty regime is closed before it is began.

REV NO: REV 7.01.034

DATE: April 07, 2006 Discovered By: Andy Zhu

Description Of Problem

A user defined SCF on the "second end" of a brace will not get included in the Joint Fatigue Calculation.

REV NO: REV 7.01.035

DATE: April 13, 2006 Discovered By: Andy Zhu

Description Of Problem

It is possible to get error using ed_elem *1 *2 if *1 and *2 happen to be part of a lleg.

REV NO: REV 7.01.036

DATE: April 13, 2006 Discovered By: Marcelo Canga

Description Of Problem

If one has a #plate that is "just a bit" under the water you can get "capsizing" due to a numerics in computing the aspect ratio of the submerged plate.

REV NO: REV 7.01.037

DATE: April 24, 2006 Discovered By: Tim Nolte

Description Of Problem

The MOSES update (and download version) was broken on April 20.

REV NO: REV 7.01.038

DATE: May 26, 2006 Discovered By: Lars Rune Helland

Description Of Problem

The -SCF option on a class command is broken. If you use it, MOSES will hang.

REV NO: REV 7.01.039

DATE: May 31, 2006 Discovered By: John Davis

Description Of Problem

The -TIDE option gives the wrong change in buoyancy.

REV NO: REV 7.01.040

DATE: July 19, 2006 Discovered By: Ray Nachlinger

Description Of Problem

The &PANEL string function returns the wrong results.

REV NO: REV 7.01.041

DATE: July 19, 2006 Discovered By:

Description Of Problem

REV NO: REV 7.01.041

DATE: July 19, 2006 Discovered By: Georgina Maldonado

Description Of Problem

If one has rings, then the Joint Properties Summary does not look good.

REV NO: REV 7.01.042

DATE: August 18, 2006 Discovered By: Marcelo Canga

Description Of Problem

If one has a "SL_ELEMENT" with a ground node as the first point, then the force in the element will be reported incorrectly. The results are, however, correct.

REV NO: REV 7.01.043

DATE: August 22, 2006 Discovered By: Yvan Leipold

Description Of Problem

The -record options does not work properly with set_var -statistics

REV NO: REV 7.01.044

DATE: August 22, 2006 Discovered By: Tim Nolte

Description Of Problem

The weight force due to a #TUBE is not always correctly computed.

REV NO: REV 7.01.045

DATE: October 24, 2006 Discovered By: Yvan Leipold

Description Of Problem

Sometimes MOSES does not restart correctly.

REV NO: REV 7.01.046

DATE: October 26, 2006 Discovered By: Stephane LE-GUENNEC

Description Of Problem

The option -PROB DURATION has a bug.

REV NO: REV 7.01.047

DATE: October 26, 2006 Discovered By: Yvan Leipold

Description Of Problem

The -PROB DURATION option on &ENV does not work correctly for structural post-processing.

REV NO: REV 7.01.048

DATE: October 27, 2006 Discovered By: Basil

Description Of Problem

The "maximum Differential Head" reported on an inactive tank during a time domain is not correct.

REV NO: REV 7.01.049

DATE: November 14, 2006 Discovered By: John Evans

Description Of Problem

Hydrodynamics is not computed correctly if you have a tide.

REV NO: REV 7.01.050

DATE: December 05, 2006 Discovered By: Weng Chee Sin

Description Of Problem

The documentation and the program did not agree on the units of the tilt beam stiffness. This fix changes the program to conform to the manual.

REV NO: REV 7.01.051

DATE: December 06, 2006 Discovered By:

Description Of Problem

REV NO: REV 7.01.051

DATE: December 10, 2006 Discovered By: Nelson Galgoul

Description Of Problem

The picture of a catenary is not correct if it has a clump weight on the bottom at the current state.

REV NO: REV 7.01.052

DATE: January 30, 2007 Discovered By: Lars Rune Helland

Description Of Problem

Plates defined during MEDIT have incorrect stresses.

REV NO: REV 7.01.053

DATE: January 30, 2007 Discovered By: Ray Nachlinger

Description Of Problem

The free surface correction for "empty" tanks (tanks with -MIMIMUM percent full) is not correct.