| DATE: September 26, 2001 | Discovered By: R. Nachlinger |
Tubes were refined based on wave length even when the wave was not applied.
| DATE: October 17, 2001 | Discovered By: Marcelo Canga |
Install fixes
| DATE: October 22, 2001 | Discovered By: Yvan Leipold |
If one "uses" too many macros one may get a program error "VALID COMMAND STACK OVERFLOW".
| DATE: October 22, 2001 | Discovered By: Roger Burger |
One cannot use a - sign in a plot title or legend.
| DATE: October 23, 2001 | Discovered By: Yvan Leipold |
If one uses the out of date command STRING in the out of date &INTEREST REPORT menu, he will get an error message.
| DATE: October 25, 2001 | Discovered By: Stolt Offshore |
The minimum difference between a set of angles was around three degrees. This is too large for some applications. It is now around 1 degree.
| DATE: October 26, 2001 | Discovered By: Yvan Leipold |
Notes are not bound to categories on a #elat command.
Code checks for beams with "plate added" are not correct.
| DATE: November 02, 2001 | Discovered By: Roger Burger |
If one restarts, then medits, and then adds a class, he will get an error "Invalid Function Name".
| DATE: November 04, 2001 | Discovered By: Paul Dixon |
It seems that using a cargo weight of 1 will change the results of FR_CARGO into producing "g" results.
| DATE: November 05, 2001 | Discovered By: Nelson Galgoul |
The hardware key is not automatically installed on Windows NT or 2000.
| DATE: November 07, 2001 | Discovered By: John Windus |
If one has a &describe body name, and name is not an existing body when in the FREQ_RESP menu, then the RAOs turn to rubbish. This fix issues a warning.
| DATE: November 07, 2001 | Discovered By: Dave Kummer |
If one has a a column with constant values in the disposition menu and he asks for statistics, then a Windows Machine will abort.
| DATE: November 07, 2001 | Discovered By: Charles Liu |
The new tank flooding scheme requires too small a time step.
| DATE: November 08, 2001 | Discovered By: McDermott |
Sometime one can "loose" part of a picture if one has connectors.
| DATE: November 12, 2001 | Discovered By: Roger Burger |
The new SACS converter omits redundant beams
| DATE: November 12, 2001 | Discovered By: Yvan Leipold |
The &connect -L_TEN does not work very well for a taut line.
| DATE: November 13, 2001 | Discovered By: Roger Burger |
If the solution system is not the normal system, plate results are not correct.
| DATE: November 14, 2001 | Discovered By: McDermott |
Under some conditions a time domain, dynamic flooding can get hung.
| DATE: November 16, 2001 | Discovered By: Charles Liu |
The units reported for flow rate are in cubic xxx per second, not minute.
| DATE: November 17, 2001 | Discovered By: Nelson Galgoul |
One cannot perform a stress analysis and use a pipe.
| DATE: November 19, 2001 | Discovered By: Ray Nachlinger |
The TANK_FLD report is wrong.
| DATE: November 19, 2001 | Discovered By: R. Nachlinger |
SRESPONSE does not work properly with environments that have an -a_sea option.
| DATE: November 26, 2001 | Discovered By: Yvan Leipold |
If one has a rod with two nodes, but one of them belongs to ground and if he does not define a depth and bottom slope, then rubbish may result.
| DATE: November 29, 2001 | Discovered By: Charles Liu |
The units on the -pump option of the &compartment command are not correct.
| DATE: December 29, 2001 | Discovered By: R.Nachlinger |
In some cases, MOSES may not compute the proper pretension for a vertical rod.
| DATE: January 07, 2002 | Discovered By: Heerema |
The weight of a h_cat line not properly applied to the second body (if it is not ground).
| DATE: February 12, 2002 | Discovered By: Charles Liu |
If one uses a class for a sp_beam and regular beams, the regular beams may not be properly reported.
| DATE: February 18, 2002 | Discovered By: R. Nachlinger |
Changing the length of a GSPR connector does not work properly.
| DATE: February 19, 2002 | Discovered By: R.Nachlinger |
If one has different "systems" (number of bodies, parts, etc) in different processes, MOSES gets confused when one changes processes.
| DATE: February 20, 2002 | Discovered By: R.Nachlinger |
If one changes the system with &DESCRIBE SYSTEM, previously defined connectors get confused.
| DATE: February 27, 2002 | Discovered By: Mr. Jung |
A gspr element with two nodes should not have an automatic offset generated to make the element have zero force initially. This makes setting up gaps quite hard. This change affects only gspr elements with two nodes. Now, the deformation is the difference in the nodes unless the user defines an offset.
| DATE: April 09, 2002 | Discovered By: Marcelo Canga |
A loop from 0 to -1 will be executed one with a value of 0.
| DATE: April 18, 2002 | Discovered By: JJ Joon |
The -euler -X option does not work properly.
| DATE: April 19, 2002 | Discovered By: JJ Joon |
The stiffness of a GSPR with a -conepy included is not correct. The force, however, is.
| DATE: April 23, 2002 | Discovered By: JJ Joon |
The options -euler +y and -euler -y and -euler +z and -euler -z are interchanged. NOTICE, if you are using these option, you need to change the data to get the results you had before.
| DATE: April 24, 2002 | Discovered By: Yvan Leipold |
In some cases one can "run out of space" when importing a hydrodynamic database.
| DATE: May 24, 2002 | Discovered By: Marcelo Canga |
Sections which are not doubly symmetric, or those that use to -reference option are not correct.
| DATE: May 29, 2002 | Discovered By: Marcelo Canga |
If one tries to do a BMOM_SHR with a sp_beam before he does a BEAM, he get nothing for results.
| DATE: June 04, 2002 | Discovered By: Several |
WINDOWS has a bug so that it does not free memory as it should. As a result, one may get a message "Cannot Allocate More Memory".
This fix changes the MOSES memory model to an old one which uses a fixed amount of space. With this model, the number specified via -MAXA is a true limit to the amount of memory used. This may cause problems.
| DATE: June 04, 2002 | Discovered By: Ray Nachlinger |
If one specifies a blank subtitle and no title, then a control character will be printed in the title place in the output.
| DATE: June 04, 2002 | Discovered By: Yvan Leipold |
In certain cases on windows, MOSES will try to allocate more space than it needs.
| DATE: July 23, 2002 | Discovered By: Roger Burger |
If one does not define nodes to associate with a load group, the part associated with the load map for this load group may be incorrect.
| DATE: August 07, 2002 | Discovered By: Anbin Wang |
The moments reported by &status f_connector are not correct. There are either 12 or 39.36 too large depending on the units used. This is simply a reporting problem everything else except the report is correct.
| DATE: August 08, 2002 | Discovered By: Anbin Wang |
The Y moment for a GSPR or FOUNDATION connector has the wrong sign.
| DATE: August 08, 2002 | Discovered By: Anbin Wang |
| DATE: September 04, 2002 | Discovered By: Yvan Leipold |
Setting individual multipliers for different categories does not work for element attributes.
Sometimes an &INSTATE -draft will not get "exactly" the right results.
| DATE: September 16, 2002 | Discovered By: Georgina Maldonado |
If one "inputs" points on a graph, it will corrupt the plots on a WINDOWS machine.
| DATE: September 17, 2002 | Discovered By: Edvin Hanken |
On a WINDOWS machine a three node plate may cause an Arithmetic Exception. This is cause by scaling undefined (and unused) numbers.
| DATE: September 18, 2002 | Discovered By: Edvin Hanken |
| DATE: September 27, 2002 | Discovered By: Roger Burger |
It ullage reported is incorrect if a tank is flooded at its minimum percent full.
| DATE: October 01, 2002 | Discovered By: Bahrain |
If you uses a category multiplier on a category containing #elat's on beams, then the B_W status will not be correct. (The forces are computed correctly, etc. The only problem is the B_W report.)
| DATE: November 19, 2002 | Discovered By: Yvan Leipold |
If one has an extremely stretchy HCAT, then he may get
| DATE: January 14, 2003 | Discovered By: Ketil Roaldsnes |
If one is plotting pictures to a window while and doing a g_press from a macro, MOSES will forget which body should be used.
an error with &connector -l_hori or -l_ten.
| DATE: January 16, 2003 | Discovered By: Ketil Roaldsnes |
The previous fix (rev6.00.055) did not work in all cases.
| DATE: January 21, 2003 | Discovered By: Tor Einar Kolstaloekken |
MOSES will sometimes get a co-processor fault on windows when END is issued in the STRUCT Menu.
| DATE: January 25, 2003 | Discovered By: Yvan Leipold |
| DATE: January 25, 2003 | Discovered By: R. Nachlinger |
A rotational "spr" or "gspr" will have a stiffness 12 or 39.36 too large depending on the units being used.
| DATE: January 27, 2003 | Discovered By: Yvan Leipold |
The fix rev6.00.058 omitted a units conversion factor. Therefore the sling length reported was off by a
| DATE: January 27, 2003 | Discovered By: Yvan Leipold |
The fix rev6.00.060 still did not fix the dynamic
| DATE: February 05, 2003 | Discovered By: Yvan Leipold |
If one defines a beam load in the opposite sense as the beam definition, it may be place on the beam incorrectly.