| DATE: January 11, 1995 | Discovered By: Bouyges Offshore |
Description Of Problem
MOSES aborts with Ran out of Space message when a lot (over 400) combination load cases are defined. Programs Affected: MOSES
REV NO: REV 501.002
| DATE: January 11, 1995 | Discovered By: Steve Rowden |
Description Of Problem
Problems can occur when changing processes and doing frequency domain analysis.
Programs Affected: All
REV NO: REV 501.003
| DATE: January 11, 1995 | Discovered By: John Windus |
Description Of Problem
When defining Multiple Pieces, one get a spurious warning. Programs Affected: All
REV NO: REV 501.004
| DATE: January 16, 1995 | Discovered By: John Windus |
Description Of Problem
When Using an old hull description and a new mesh model, it is possible that surfaces will be redefined without warning.
Programs Affected: All
REV NO: REV 501.005
| DATE: January 17, 1995 | Discovered By: Barry Miller |
Description Of Problem
The PC aborts with a co-processor fault when some jobs are restarted.
Programs Affected: All
REV NO: REV 501.006
| DATE: January 18, 1995 | Discovered By: Barry Miller |
Description Of Problem
Programs will "forget" the current state when restarted.
Programs Affected: all
REV NO: REV 501.007
| DATE: January 26, 1995 | Discovered By: R. Nachlinger |
Description Of Problem
Sometimes a non-convex panel will not be caught by the convex checker. When this happens, a bad diffraction mesh may result.
Programs Affected: OSCAR II, MOSES
REV NO: REV 501.008
| DATE: January 27, 1995 | Discovered By: Guillaume le Marechal |
Description Of Problem
Default eccentricity in STRUDL should be local instead of global.
Programs Affected: All
REV NO: REV 501.009
| DATE: January 28, 1995 | Discovered By:Yvan |
Description Of Problem
IY and IZ on PRI of STRUDL model is swapped. Programs Affected:All with connie
REV NO: REV 501.010
| DATE: February 02, 1995 | Discovered By: John Windus |
Description Of Problem
For some strange geometries, panels can be emitted from the &surface menu with the wrong normal.
Programs Affected: All
REV NO: REV 501.011
| DATE: February 04, 1995 | Discovered By: R. Nachlinger |
Description Of Problem
It a program is run with only an entry to &SURFACE, it will abort when it is rerun with the same root unless the database is tidied.
Programs Affected: All
REV NO: REV 501.012
| DATE: February 05, 1995 | Discovered By: C. Owens |
Description Of Problem
With some problems, in the &SURFACE Menu, the panel system direction cosine matrix will not be computed correctly.
Programs Affected: All
REV NO: REV 501.013
| DATE: February 22, 1995 | Discovered By: Carl Webb |
Description Of Problem
A program treats the angle defined with the -anchor option as a global angle rather than one relative to the body.
Programs Affected: All
REV NO: REV 501.014
| DATE: February 23, 1995 | Discovered By: Carl Webb |
Description Of Problem
&pltmodel mesh will not work on a HP, if an input panel is not convex and it must be triangularized.
Programs Affected: All
REV NO: REV 501.015
| DATE: February 27, 1995 | Discovered By: Steve Rowden |
Description Of Problem
The righting arms in the static process menu do not work.
Programs Affected: MOSES, OSCAR II
REV NO: REV 501.016
| DATE: March 2, 1995 | Discovered By: R. Nachlinger |
Description Of Problem
The STRUDL converter emits too many shape dimensions.
Programs Affected: All
REV NO: REV 501.017
| DATE: March 13, 1995 | Discovered By: Carl Webb |
Description Of Problem
A manual printed on a postscript device will have some extra backslashes in it.
Programs Affected: All
REV NO: REV 501.018
| DATE: March 13, 1995 | Discovered By: Carl Webb |
Description Of Problem
If one issues prcomp -no_rao, followed by &export h_dbase, followed by RAO, he will get a harmless error message.
Programs Affected: All
REV NO: REV 501.019
| DATE: March 14, 1995 | Discovered By: Dave Kummer |
Description Of Problem
Results of a time synthesis differ more than they should if one has a different number of headings.
Programs Affected: All
REV NO: REV 501.020
| DATE: March 15, 1995 | Discovered By: Tim Nolte |
Description Of Problem
If one does EQUI followed immediately by LAUNCH, then it is possible that the launch will "hang" if it almost slides in the equilibrium configuration.
Programs Affected: OSCAR II, MOSES
REV NO: REV 501.021
| DATE: March 22, 1995 | Discovered By: Mr. Gras |
Description Of Problem
If one immediately follows an EQUI with a PRCOMP, then the viscous damping will not be properly computed.
Programs Affected: All
REV NO: REV 501.022
| DATE: March 23, 1995 | Discovered By: Peter Lai |
Description Of Problem
Sometimes after a RARM, one may get error in computing tank depth. This is purely a cosmetic problem.
Programs Affected: All
REV NO: REV 501.023
| DATE: March 23, 1995 | Discovered By: Peter Lai |
Description Of Problem
Hydrostatics with waves does not always work correctly.
Programs Affected: All
REV NO: REV 501.024
| DATE: March 23, 1995 | Discovered By: R. Nachlinger |
Description Of Problem
The default factor for wave drift damping is not correctly set.
Programs Affected: all
REV NO: REV 501.025
| DATE: March 28, 1995 | Discovered By: Carl Webb |
Description Of Problem
If one attempts to export a hydrodynamic database in a run where either a PRCOMP or an RAO has not been issued, bad data will be emitted.
Programs Affected: All
REV NO: REV 501.026
| DATE: April 03, 1995 | Discovered By: John Windus |
Description Of Problem
If one issues a STORE command in the disposition menu, the values for variables greater than the sixth one will be incorrect.
Programs Affected: All
REV NO: REV 501.027
| DATE: April 04, 1995 | Discovered By: Yuon Hui Sun |
Description Of Problem
In some cases, one can get an error message that weight exceeds maximum displacement when it is not true.
Programs Affected: All
REV NO: REV 501.028
| DATE: April 27, 1995 | Discovered By: Yvan Leipold |
Description Of Problem
The SACS converter has problems with metric input. Programs Affected: All
REV NO: REV 501.029
| DATE: May 16, 1995 | Discovered By: Georgina Moldonado |
Description Of Problem
A #PLATE *p1 *p2 *p3 gives an incorrect error.
Programs Affected: All
REV NO: REV 501.030
| DATE: July 20, 1995 | Discovered By: PetroMarine |
Description Of Problem
A PC may abort with a "character buffer too small" when using the string function &BODY(.. EXNODE).
Programs Affected: All