WELCOME TO MOSES Rev devlop ============================ This Program is licensed for the exclusive use of Ultramarine inc. Copying of this program or use by anyone other than an employee of the above firm without written consent of Ultramarine is strictly prohibited. +++ M A I N +++ =============== >&title Test Of 3D-Diffraction Theory With Gdofs >&dimen -dimen feet kips >&device -g_default device -oecho no >&set num_modes = 3 >inmodel Time To perform Inmodel : CP= 0.07 >&apply @ >&instate -con 10 >&weight -compute temp 0. 32 129 129 >&stat +++ B U O Y A N C Y A N D W E I G H T F O R T E M P +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Draft = 10.00 Roll Angle = 0.00 Pitch Angle = 0.00 Wet Radii Of Gyration About CG K-X = 53.80 K-Y = 176.71 K-Z = 171.33 GMT = 63.42 GML = 1313.36 /-- Center of Gravity ---/ Sounding % Full Name Weight ---X--- ---Y--- ---Z--- -------- -------- ---------------- Part TEMP ------------ LOAD_GRO 25589.23 200.00 0.00 24.91 ======== ======== ======= ======= ======= Total 25589.23 200.00 0.00 24.91 Buoyancy 25589.24 200.00 0.00 5.00 >&describe interest -assoc *1 *2 *3 *4 >&status mot +++ P O I N T M O T I O N +++ =============================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Locations in Global System - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Point Part X Y Z Mot-X Mot-Y Mot-Z M-MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- *1 TEMP 0.0 0.0 -10.0 0.0 0.0 0.0 0.0 *2 TEMP 100.0 0.0 -10.0 0.0 0.0 0.0 0.0 *3 TEMP 300.0 0.0 -10.0 0.0 0.0 0.0 0.0 *4 TEMP 400.0 0.0 -10.0 0.0 0.0 0.0 0.0 >&subtitle Without Gdofs >stp_hyd +++ H Y D R O _ D Y N A M I C S +++ =================================== Setting Pressure Name for TEMP to TEMP ====================================== Time to Generate 18 Panels For T : CP= 0.00 Time For 3D Diff. Panels, Freq. 1 : CP= 0.00 Time For 3D Diff. Panels, Freq. 2 : CP= 0.00 Time For 3D Diff. Panels, Freq. 3 : CP= 0.01 Time For 3D Diff. Panels, Freq. 4 : CP= 0.00 Time For 3D Diff. Panels, Freq. 5 : CP= 0.01 Time For 3D Diff. Panels, Freq. 6 : CP= 0.00 Time For 3D Diff. Panels, Freq. 7 : CP= 0.00 Time For 3D Diff. Panels, Freq. 8 : CP= 0.01 Time For 3D Diff. Panels, Freq. 9 : CP= 0.00 Time For 3D Diff. Panels, Freq. 10 : CP= 0.01 Setting Drift Name for TEMP to TEMP =================================== Time to Sum Pressures For 18 Panels on TEMP : CP= 0.00 Time To Set Up Convolution For TEMP : CP= 0.01 +++ M A I N +++ =============== +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== Time To Compute RAOs : CP= 0.01 RAOs Moved to X = 0.0 Y = 0.0 Z = 0.0 =============================================== +++ D I S P O S I T I O N +++ ============================= +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== RAOs Moved to X = 200.0 Y = 0.0 Z = 0.0 =============================================== +++ D I S P O S I T I O N +++ ============================= +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== RAOs Moved to X = 400.0 Y = 0.0 Z = 0.0 =============================================== +++ D I S P O S I T I O N +++ ============================= +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== RAOs Moved to X = 200.0 Y = 0.0 Z = 100.0 =============================================== +++ D I S P O S I T I O N +++ ============================= +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== +++ M A I N +++ =============== >struc +++ S T R U C T U R A L S O L U T I O N +++ ============================================= >modes -num_ev 3 Extracting Modes of TEMP ======================== Time To Generate Mass Data : CP= 0.01 Time to Define Model Topology : CP= 0.00 Time to Complete Nodal Masses : CP= 0.00 Time to Define Stiffness Blocks : CP= 0.01 Time to Form Element Matricies : CP= 0.00 Time to Form Global Stiffness Matrix : CP= 0.00 Time to Form Global Mass Matrix : CP= 0.00 Time to Extract Modes : CP= 0.00 >end +++ M A I N +++ =============== >strpos +++ S T R U C T U R A L P O S T - P R O C E S S I N G +++ =========================================================== >modes value >end +++ M A I N +++ =============== >&describe body temp -gen >&equi +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- TEMP Location 0.00 0.00 -10.00 0.00 0.00 0.00 N Force -0.00 0.00 0.00 0 0 0 Equilibrium Converged in 1 Iterations >&status config +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- TEMP Location 0.00 0.00 -10.00 0.00 0.00 0.00 N Force -0.00 0.00 0.00 0 0 0 >&subtitle With Gdofs >stp_hyd +++ H Y D R O _ D Y N A M I C S +++ =================================== Setting Pressure Name for TEMP to TEMP|003 ========================================== Time to Generate 18 Panels For T : CP= 0.00 Time For 3D Diff. Panels, Freq. 1 : CP= 0.00 Time For 3D Diff. Panels, Freq. 2 : CP= 0.00 Time For 3D Diff. Panels, Freq. 3 : CP= 0.01 Time For 3D Diff. Panels, Freq. 4 : CP= 0.00 Time For 3D Diff. Panels, Freq. 5 : CP= 0.01 Time For 3D Diff. Panels, Freq. 6 : CP= 0.00 Time For 3D Diff. Panels, Freq. 7 : CP= 0.00 Time For 3D Diff. Panels, Freq. 8 : CP= 0.00 Time For 3D Diff. Panels, Freq. 9 : CP= 0.00 Time For 3D Diff. Panels, Freq. 10 : CP= 0.01 Setting Drift Name for TEMP to TEMP|003 ======================================= Time to Sum Pressures For 18 Panels on TEMP : CP= 0.01 Time To Set Up Convolution For TEMP|003 : CP= 0.00 +++ M A I N +++ =============== +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== Time To Compute RAOs : CP= 0.01 RAOs Moved to X = 0.0 Y = 0.0 Z = 0.0 =============================================== +++ D I S P O S I T I O N +++ ============================= +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== RAOs Moved to X = 200.0 Y = 0.0 Z = 0.0 =============================================== +++ D I S P O S I T I O N +++ ============================= +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== RAOs Moved to X = 400.0 Y = 0.0 Z = 0.0 =============================================== +++ D I S P O S I T I O N +++ ============================= +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== RAOs Moved to X = 200.0 Y = 0.0 Z = 100.0 =============================================== +++ D I S P O S I T I O N +++ ============================= +++ F R E Q U E N C Y R E S P O N S E +++ =========================================== +++ M A I N +++ =============== >struct +++ S T R U C T U R A L S O L U T I O N +++ ============================================= >s_rest ~rest >lcase -rao Time To Generate Load Cases : CP= 0.02 >ssolve Reducing Stiffness of DEFAULT ============================= Time to Define Model Topology : CP= 0.01 Time to Complete Nodal Loads : CP= 0.00 Time to Define Stiffness Blocks : CP= 0.00 Time to Form Element Matricies : CP= 0.00 Time to Form Global Stiffness Matrix : CP= 0.00 Time to Form Global Load Matrix : CP= 0.00 Time to Factor Stiffness Matrix : CP= 0.00 Expanding Results of DEFAULT ============================ Time For Backward Substitution : CP= 0.00 Time to Store Deflections : CP= 0.00 Time to Store Element Internal Loads : CP= 0.00 >end +++ M A I N +++ =============== >strpost +++ S T R U C T U R A L P O S T - P R O C E S S I N G +++ =========================================================== >&sele :l -sel rao@ frq@ >rest -load :l -detail >end +++ M A I N +++ =============== MOSES Finished Normally ========================= CP Time 0.33 ======================== Total Units 0.33 ========================