WELCOME TO MOSES Rev devlop ============================ This Program is licensed for the exclusive use of Ultramarine inc. Copying of this program or use by anyone other than an employee of the above firm without written consent of Ultramarine is strictly prohibited. +++ M A I N +++ =============== >&dimen -DIMEN FEET KIPS >&TITLE Using Stability Macros >&device -oecho no -g_default file >inmodel Loading File: /smb/software/devlop/ultra//hdesk/tools/stab/macros/stab.mac Defining Vessel with: /smb/software/devlop/ultra//hdesk/tools/vessels/cbarges/cbrg180.dat Time To perform Inmodel : CP= 0.18 >&INSTATE -CONDITION cbrg180 7 0 0 >&WEIGHT -COMPUTE cbrg180 5 32 85 85 >&status B_W +++ B U O Y A N C Y A N D W E I G H T F O R C B R G 1 8 0 +++ ===================================================================== Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Draft = 7.00 Roll Angle = 0.00 Pitch Angle = 0.00 Wet Radii Of Gyration About CG K-X = 28.83 K-Y = 78.13 K-Z = 78.12 GMT = 29.15 GML = 379.30 /-- Center of Gravity ---/ Sounding % Full Name Weight ---X--- ---Y--- ---Z--- -------- -------- ---------------- Part CBRG180 ------------ LOAD_GRO 3751.38 96.06 -0.00 5.50 ======== ======== ======= ======= ======= Total 3751.38 96.06 -0.00 5.50 Buoyancy 3751.38 96.06 0.00 3.56 >HSTATICS +++ H Y D R O S T A T I C S +++ =============================== >&status nwt_down +++ NON WETHERTIGHT DOWN FLOODING POINTS +++ ============================================ Process is DEFAULT: Units Are Degrees, Feet, and Kips Unless Specified Compart. Name Height Compart. Name Height -------- -------- -------- -------- -------- -------- CBRG180 *BS 13.00 CBRG180 *SP 13.00 CBRG180 *SS 13.00 >stab_ok 7 2.5 20 -wind 100 -yaw -r_tolerance .001 .1 .2 -i_gm \ 0 -i_ar_ratio 1.4 -i_arr@30 \ 1.3 -i_ar_wratio 1 9 -i_arm_ratio 0 \ -i_down_h 0 -i_are@marm 0 -i_are@dfld \ 0 -i_are@40 0 -i_are@30 \ 0 -i_arebtw 0 -i_arm_ar 0 \ -i_ar_resid 0 -i_zcross 0 -i_theta1 \ 0 -i_range 0 -i_r_m_equi \ 0 -i_ang_diff 0 -i_dang_t1 0 -i_dwt_t1 \ 0 -i_dang 0 -i_ang@marm \ 0 -i_rarm@m30 0 -d_ar_ratio 0 \ -d_arr@30 0 -d_arm_ratio 0 -d_down_h \ 0 -d_gm 0 -d_are@marm \ 0 -d_are@dfld 0 -d_are@40 0 -d_are@30 \ 0 -d_arebtw 0 -d_arm_ar \ 0 -d_ar_resid 0 -d_zcross 0 \ -d_theta1 0 -d_range 0 -d_r_m_equi \ 0 -d_ang_diff 0 -d_dang_t1 \ 0 -d_dwt_t1 0 -d_dang 0 \ -d_ang@marm 0 -d_rarm@m30 0 -d_ar_wratio \ 1 +++ D I S P O S I T I O N +++ ============================= +++ H Y D R O S T A T I C S +++ =============================== +++ S T A B I L I T Y S U M M A R Y +++ ========================================= The Following Intact Condition ======================================= Draft = 7.00 Ft Roll = 0.00 Deg Pitch = 0.00 Deg VCG = 5.50 Ft Axis Angle = 0.00 Deg Wind Vel = 100.00 Knots 1st Intercept = 5.04 Deg 2st Intercept = Not App. Deg NWT Down-Flooding = 17.68 Deg WT Down-Flooding = 18.74 Deg MIN (1st Int. NWT Down) = 17.68 Deg Fails Some of The Stability Requirements: ========================================= GM >= 0.00 FT 29.15 Passes Static Heel w/o Wind <= 0.00 DEG 0.00 Fails NWT Dfld Angle - 1st Interc.>= 0.00 DEG 12.64 Passes WT Dfld Angle - 1st Interc.>= 0.00 DEG 13.70 Passes Downflood Angle >= 0.00 DEG 17.68 Passes Angle @ Max Righting Arm >= 0.00 DEG 30.00 Passes Range - fact * Equi >= 0.00 DEG Not App. Passes 2nd - 1st Intercepts >= 0.00 DEG Not App. Passes 1st Intercept <= 0.00 DEG 5.04 Fails Range >= 0.00 DEG Not App. Passes Dfld Height @ Equilibrium >= 0.00 FT 9.46 Passes Area Ratio >= 1.40 1.81 Passes Area Ratio @ 30 >= 1.30 1.81 Passes Area Ratio with Wave Roll >= 1.00 0.05 Fails RA/HA Ratio >= 0.00 3.81 Passes RA at roll >= 30 deg >= 0.00 FT 10.51 Passes Arm Area @ 2nd Intercept >= 0.00 FT*DEG 80.42 Passes Arm Area Residual >= 0.00 FT*DEG 42.55 Passes Arm Area @ Dfld >= 0.00 FT*DEG 80.24 Passes Arm Area @ Max Right. Arm >= 0.00 FT*DEG 204.33 Passes Arm Area @ 30 Degrees >= 0.00 FT*DEG 80.24 Passes Arm Area @ 40 Degrees >= 0.00 FT*DEG 80.24 Passes Arm Area btw 30 and 40 Deg >= 0.00 FT*DEG 0.00 Fails >stab_ok 7 2.5 20 -wind 100 -yaw 0 -damage 5p -i_gm 0 \ -i_ar_ratio 1.4 -i_arr@30 1.3 -i_ar_wratio \ 1 -i_arm_ratio 0 -i_down_h \ 0 -i_are@marm 0 -i_are@dfld 0 -i_are@40 \ 0 -i_are@30 0 -i_arebtw \ 0 -i_arm_ar 0 -i_ar_resid 0 \ -i_zcross 0 -i_theta1 0 -i_range \ 0 -i_r_m_equi 0 -i_ang_diff \ 0 -i_dang_t1 0 -i_dwt_t1 0 -i_dang \ 0 -i_ang@marm 0 -i_rarm@m30 \ 0 -d_ar_ratio 0 -d_arr@30 0 \ -d_arm_ratio 0 -d_down_h 0 -d_gm \ 0 -d_are@marm 0 -d_are@dfld \ 0 -d_are@40 0 -d_are@30 0 -d_arebtw \ 0 -d_arm_ar 0 -d_ar_resid \ 0 -d_zcross 0 -d_theta1 0 \ -d_range 0 -d_r_m_equi 0 -d_ang_diff \ 0 -d_dang_t1 0 -d_dwt_t1 \ 0 -d_dang 0 -d_ang@marm 0 \ -d_rarm@m30 0 -d_ar_wratio 1 +++ D I S P O S I T I O N +++ ============================= +++ H Y D R O S T A T I C S +++ =============================== +++ S T A B I L I T Y S U M M A R Y +++ ========================================= The Following Damaged Condition ======================================= with 5p Damaged Draft = 6.67 Ft Roll = 0.93 Deg Pitch = 0.31 Deg VCG = 5.50 Ft Axis Angle = 0.00 Deg Wind Vel = 100.00 Knots 1st Intercept = 5.20 Deg 2st Intercept = Not App. Deg NWT Down-Flooding = 15.29 Deg WT Down-Flooding = 18.88 Deg MIN (1st Int. NWT Down) = 15.29 Deg Fails Some of The Stability Requirements: ========================================= GM >= 0.00 FT 27.27 Passes Static Heel w/o Wind <= 0.00 DEG 0.93 Fails NWT Dfld Angle - 1st Interc.>= 0.00 DEG 10.09 Passes WT Dfld Angle - 1st Interc.>= 0.00 DEG 13.68 Passes Downflood Angle >= 0.00 DEG 15.29 Passes Angle @ Max Righting Arm >= 0.00 DEG 27.50 Passes Range - fact * Equi >= 0.00 DEG Not App. Passes 2nd - 1st Intercepts >= 0.00 DEG Not App. Passes 1st Intercept <= 0.00 DEG 5.20 Fails Range >= 0.00 DEG Not App. Passes Dfld Height @ Equilibrium >= 0.00 FT 7.85 Passes Area Ratio >= 0.00 1.51 Passes Area Ratio @ 30 >= 0.00 1.51 Passes Area Ratio with Wave Roll >= 1.00 1.37 Passes RA/HA Ratio >= 0.00 3.19 Passes RA at roll >= 30 deg >= 0.00 FT 9.40 Passes Arm Area @ 2nd Intercept >= 0.00 FT*DEG 56.31 Passes Arm Area Residual >= 0.00 FT*DEG 25.55 Passes Arm Area @ Dfld >= 0.00 FT*DEG 56.15 Passes Arm Area @ Max Right. Arm >= 0.00 FT*DEG 162.61 Passes Arm Area @ 30 Degrees >= 0.00 FT*DEG 56.15 Passes Arm Area @ 40 Degrees >= 0.00 FT*DEG 56.15 Passes Arm Area btw 30 and 40 Deg >= 0.00 FT*DEG 0.00 Fails MOSES Finished Normally ========================= CP Time 0.43 ======================== Total Units 0.43 ========================