WELCOME TO MOSES Rev devlop ============================ This Program is licensed for the exclusive use of Ultramarine inc. Copying of this program or use by anyone other than an employee of the above firm without written consent of Ultramarine is strictly prohibited. +++ M A I N +++ =============== >&dimen -dim feet kips >&device -g_default device -oecho n >inmodel Loading File: /smb/software/devlop/ultra//hdesk/tools/macros/rollup.mac Time To perform Inmodel : CP= 0.07 >rollup roll 10 -support *a *e -crane *b,15 *f,100 -ap_f *d,5,1,59 Crane 1 Node = *b Maximum lift = 15 Crane 2 Node = *f Maximum lift = 100 Applied force 1 Nodes = *d Vertical force = 5 Horiz force = 1 Angle = 59 +++ M O D E L E D I T I N G +++ ================================= +++ M A I N +++ =============== Current angle = 0. Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== Moving Attachment of Connector AFNV1 ==================================== Moving Attachment of Connector AFNH1 ==================================== Changing Length of Connector AFNV1 ================================== Setting Activity Of AFNH1 To Inactive ======================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 -0.01 0.00 0.00 N Force 0.00 0.00 -0.02 0 0 0 Equilibrium Converged in 2 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 0.02 -92.57 -1374 2156 0 Inertia 0.00 0.00 0.02 0 0 0 Flex. Connectors -0.00 -0.01 43.83 1375 -1063 0 Rigid Connectors 0.00 -0.01 48.72 0 -1090 0 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AFNV1 ROLL 0.0 -0.0 5.0 0 0 0 5 CRANE1 ROLL 0.0 -0.0 15.0 0 0 0 15 CRANE2 ROLL -0.0 -0.0 23.8 0 0 0 24 SN1 ROLL 0.0 -0.0 27.3 0 0 0 27 SN2 ROLL 0.0 -0.0 21.4 0 0 0 21 Current angle = 10 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== Moving Attachment of Connector AFNV1 ==================================== *** WARNING: No Connectors Selected =================================== Changing Length of Connector AFNV1 ================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 9.99 0.00 0.00 N Force 0.00 -0.00 -0.01 0 0 0 Equilibrium Converged in 2 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -16.06 -91.17 -1353 2123 -373 Inertia 0.00 0.00 0.01 0 0 0 Flex. Connectors -0.00 7.60 43.17 1354 -1047 185 Rigid Connectors 0.00 8.45 47.99 0 -1073 189 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AFNV1 ROLL 0.0 0.9 4.9 0 0 0 5 CRANE1 ROLL 0.0 2.6 14.8 0 0 0 15 CRANE2 ROLL -0.0 4.1 23.5 0 0 0 24 SN1 ROLL 0.0 4.7 26.9 0 0 0 27 SN2 ROLL 0.0 3.7 21.1 0 0 0 21 Current angle = 20 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== Moving Attachment of Connector AFNV1 ==================================== *** WARNING: No Connectors Selected =================================== Changing Length of Connector AFNV1 ================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 19.99 0.00 0.00 N Force 0.00 0.00 -0.01 0 0 0 Equilibrium Converged in 2 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -31.64 -86.99 -1291 2026 -736 Inertia 0.00 0.00 0.01 0 0 0 Flex. Connectors -0.00 14.98 41.19 1292 -999 364 Rigid Connectors 0.00 16.66 45.79 0 -1024 373 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AFNV1 ROLL 0.0 1.7 4.7 0 0 0 5 CRANE1 ROLL 0.0 5.1 14.1 0 0 0 15 CRANE2 ROLL -0.0 8.1 22.4 0 0 0 24 SN1 ROLL 0.0 9.3 25.7 0 0 0 27 SN2 ROLL 0.0 7.3 20.1 0 0 0 21 Current angle = 30 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== Moving Attachment of Connector AFNV1 ==================================== *** WARNING: No Connectors Selected =================================== Changing Length of Connector AFNV1 ================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 29.99 0.00 0.00 N Force 0.00 0.00 -0.01 0 0 0 Equilibrium Converged in 2 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -46.27 -80.18 -1190 1867 -1076 Inertia 0.00 0.00 0.01 0 0 0 Flex. Connectors -0.00 21.91 37.97 1191 -921 532 Rigid Connectors 0.00 24.36 42.20 0 -944 545 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AFNV1 ROLL 0.0 2.5 4.3 0 0 0 5 CRANE1 ROLL 0.0 7.5 13.0 0 0 0 15 CRANE2 ROLL -0.0 11.9 20.6 0 0 0 24 SN1 ROLL 0.0 13.7 23.7 0 0 0 27 SN2 ROLL 0.0 10.7 18.5 0 0 0 21 Current angle = 40 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== Moving Attachment of Connector AFNV1 ==================================== *** WARNING: No Connectors Selected =================================== Changing Length of Connector AFNV1 ================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 39.99 0.00 0.00 N Force 0.00 0.00 -0.00 0 0 0 Equilibrium Converged in 2 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -59.49 -70.93 -1053 1652 -1384 Inertia 0.00 0.00 0.00 0 0 0 Flex. Connectors -0.00 28.17 33.59 1054 -815 684 Rigid Connectors 0.00 31.32 37.34 0 -835 701 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AFNV1 ROLL 0.0 3.2 3.8 0 0 0 5 CRANE1 ROLL 0.0 9.6 11.5 0 0 0 15 CRANE2 ROLL -0.0 15.3 18.2 0 0 0 24 SN1 ROLL 0.0 17.6 20.9 0 0 0 27 SN2 ROLL 0.0 13.7 16.4 0 0 0 21 Current angle = 50 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== Moving Attachment of Connector AFNV1 ==================================== *** WARNING: No Connectors Selected =================================== Changing Length of Connector AFNV1 ================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 49.98 0.00 0.00 N Force 0.00 -0.00 0.00 0 0 0 Equilibrium Converged in 2 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -70.90 -59.52 -883 1386 -1650 Inertia 0.00 0.00 -0.00 0 0 0 Flex. Connectors -0.00 33.57 28.19 884 -684 815 Rigid Connectors 0.00 37.32 31.33 0 -700 835 ======= ======= ======= ======= ======= ======= Total 0.00 -0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- AFNV1 ROLL 0.0 3.8 3.2 0 0 0 5 CRANE1 ROLL 0.0 11.5 9.7 0 0 0 15 CRANE2 ROLL -0.0 18.2 15.3 0 0 0 24 SN1 ROLL 0.0 20.9 17.6 0 0 0 27 SN2 ROLL 0.0 16.4 13.8 0 0 0 21 Current angle = 60 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== Moving Attachment of Connector AFNV1 ==================================== *** WARNING: No Connectors Selected =================================== *** WARNING: No Connectors Selected =================================== Setting Activity Of AFNV1 To Inactive ======================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 59.86 0.00 0.00 N Force 0.00 0.00 -0.00 0 0 0 Equilibrium Converged in 3 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -80.05 -46.48 -690 1082 -1863 Inertia 0.00 0.00 0.00 0 0 0 Flex. Connectors -0.00 36.75 21.37 690 -566 975 Rigid Connectors 0.00 43.30 25.11 0 -514 889 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- CRANE1 ROLL 0.0 13.0 7.5 0 0 0 15 CRANE2 ROLL -0.0 23.8 13.8 0 0 0 28 SN1 ROLL 0.0 25.9 15.0 0 0 0 30 SN2 ROLL 0.0 17.4 10.1 0 0 0 20 Current angle = 70 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== *** WARNING: No Connectors Selected =================================== *** WARNING: No Connectors Selected =================================== *** WARNING: No Connectors Selected =================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 69.80 0.00 0.00 N Force 0.00 -0.00 -0.01 0 0 0 Equilibrium Converged in 3 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -86.88 -31.97 -474 744 -2022 Inertia 0.00 0.00 0.01 0 0 0 Flex. Connectors -0.00 39.81 14.70 475 -389 1055 Rigid Connectors 0.00 47.07 17.26 0 -353 968 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- CRANE1 ROLL 0.0 14.1 5.2 0 0 0 15 CRANE2 ROLL -0.0 25.7 9.5 0 0 0 27 SN1 ROLL 0.0 28.1 10.3 0 0 0 30 SN2 ROLL 0.0 19.0 7.0 0 0 0 20 Current angle = 80 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== *** WARNING: No Connectors Selected =================================== *** WARNING: No Connectors Selected =================================== *** WARNING: No Connectors Selected =================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 79.64 0.00 0.00 N Force 0.00 -0.00 -0.02 0 0 0 Equilibrium Converged in 5 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -91.06 -16.65 -246 388 -2119 Inertia 0.00 0.00 0.02 0 0 0 Flex. Connectors -0.00 41.39 7.65 247 -201 1091 Rigid Connectors 0.00 49.67 8.98 0 -184 1029 ======= ======= ======= ======= ======= ======= Total 0.00 -0.00 -0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- CRANE1 ROLL 0.0 14.8 2.7 0 0 0 15 CRANE2 ROLL -0.0 26.6 4.9 0 0 0 27 SN1 ROLL 0.0 29.5 5.4 0 0 0 30 SN2 ROLL 0.0 20.2 3.6 0 0 0 21 Current angle = 90 Moving Attachment of Connector CRANE1 ===================================== Changing Length of Connector CRANE1 =================================== Moving Attachment of Connector CRANE2 ===================================== Changing Length of Connector CRANE2 =================================== *** WARNING: No Connectors Selected =================================== *** WARNING: No Connectors Selected =================================== +++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++ =============================================================== Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Location and Net Force at Body Origin Body X Y Z RX RY RZ -------- --------- --------- --------- --------- --------- --------- ROLL Location 0.00 0.00 100.00 90.00 0.00 0.00 N Force 0.00 0.00 0.00 0 0 0 Equilibrium Converged in 1 Iterations +++ F O R C E S A C T I N G O N R O L L +++ ================================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Results Are Reported In Body System Type of Force X Y Z MX MY MZ ------------------ --------- --------- --------- --------- --------- --------- Weight 0.00 -92.57 0.00 0 0 -2155 Flex. Connectors -0.00 38.14 -0.00 0 0 940 Rigid Connectors 0.00 54.43 -0.00 0 0 1216 ======= ======= ======= ======= ======= ======= Total 0.00 0.00 0.00 0 0 0 +++ C O N N E C T O R F O R C E S +++ ======================================= Process is ROLLUP: Units Are Degrees, Feet, and Kips Unless Specified Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 ) Conn. Body FX FY FZ MX MY MZ MAG. -------- -------- ------- ------- ------- ------- ------- ------- ------- CRANE1 ROLL 0.0 15.0 -0.0 0 0 0 15 CRANE2 ROLL -0.0 23.1 -0.0 0 0 0 23 SN1 ROLL 0.0 30.6 -0.0 0 0 0 31 SN2 ROLL 0.0 23.8 -0.0 0 0 0 24 Events - 0. 10 20 30 40 50 60 70 80 90 +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ D I S P O S I T I O N +++ ============================= +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ D I S P O S I T I O N +++ ============================= +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ I L L U S T R A T E +++ =========================== +++ P R O C E S S P O S T - P R O C E S S I N G +++ ===================================================== +++ M A I N +++ =============== >structure +++ S T R U C T U R A L S O L U T I O N +++ ============================================= Time To Generate Load Cases : CP= 0.00 Time To Generate Load Cases : CP= 0.01 Time To Generate Load Cases : CP= 0.01 Time To Generate Load Cases : CP= 0.00 Time To Generate Load Cases : CP= 0.02 Time To Generate Load Cases : CP= 0.00 Time To Generate Load Cases : CP= 0.00 Time To Generate Load Cases : CP= 0.02 Time To Generate Load Cases : CP= 0.00 Time To Generate Load Cases : CP= 0.01 Solving >ssolve -nonlinear -tol .01 Reducing Stiffness of DEFAULT ============================= Time to Define Model Topology : CP= 0.01 Time to Complete Nodal Loads : CP= 0.00 Time to Define Stiffness Blocks : CP= 0.00 Time to Form Element Matricies : CP= 0.00 Time to Form Global Stiffness Matrix : CP= 0.00 Time to Form Global Load Matrix : CP= 0.00 Time to Factor Stiffness Matrix : CP= 0.00 Solving Residual Model ====================== Time to Define Model Topology : CP= 0.00 Load Case P_0. Converged in 3 Iterations ======================================== Load Case P_10 Converged in 3 Iterations ======================================== Load Case P_20 Converged in 3 Iterations ======================================== Load Case P_30 Converged in 3 Iterations ======================================== Load Case P_40 Converged in 3 Iterations ======================================== Load Case P_50 Converged in 2 Iterations ======================================== Load Case P_60 Converged in 3 Iterations ======================================== Load Case P_70 Converged in 3 Iterations ======================================== Load Case P_80 Converged in 3 Iterations ======================================== Load Case P_90 Converged in 3 Iterations ======================================== Time to Solve Boundary Relations of DEFAULT : CP= 0.03 Expanding Results of DEFAULT ============================ Time For Backward Substitution : CP= 0.01 Time to Store Deflections : CP= 0.00 Time to Store Element Internal Loads : CP= 0.00 >end +++ M A I N +++ =============== >strpost +++ S T R U C T U R A L P O S T - P R O C E S S I N G +++ =========================================================== >joint displacement >restraint -detail >beam_post code >end +++ M A I N +++ =============== MOSES Finished with 15 Warnings ================================= CP Time 0.43 ======================== Total Units 0.43 ========================